Dual Automatic Spider-Elevator
Patented

Bilco's Dual Tools have provided reliable and time-efficient service since their introduction to the oil industry in February 1978. They were designed for use with cementing or production equipment, and were engineered to safely pull or run two strings of tubing or casing simultaneously.

Easy and Quick Access to Open Hole.
A complete open hole can be obtained in less than two minutes with the easy removal of one bolt that holds the split-bowl Spider together. Easy access to an open hole is very important when packers, centralizers, hangers and other types of production equipment must be lowered into it. Equipment up to six inches in diameter can be lowered through the Spider without necessitating the removal of the Spider.

Bilco's patented design eliminates the need for the external pipe divider and inner bushings used in the older models; saving 45 minutes or more of costly rig time; and eliminating the danger of leg injury during the removal of the bushings.

Heavy Duty Construction.
Bilco's Dual Tools are constructed from the strongest alloy steel available, and have been tested and rated at 400 tons.

Designed for Easy Operation.
The control console for the Dual Tools may be placed directly on the rig floor, allowing easy accessibility to the operator.

Eliminates Accidental Droppage of String.
The Control Console houses two air regulators, one controlling air pressure to the Spider and the other controlling air pressure to the Elevator. By regulating the air pressure, the slips cannot be accidentally upset after one joint of 2 3/8" tubing has been picked up; eliminating costly rig downtime.

Saves Valuable Rig Time.
A total of three to four hours of rigging up and rigging down time can be saved per job, through the use of Bilco's Dual Automatic Spider-Elevator.

Main Menu